http://WWW.CONTAINEROFFICEBANGALORE.COM
AMOFFICESOLUTIONS 5a1fd159b6926d0b1463b31b False 81 43
OK
background image not found
Products
https://productimages.withfloats.com/tile/5a34e3051a6f760a3060acba.jpg
Portable Office Container INR 0 INR 0
5b6b364c277b75052ecba328
-NaN%

Portable Office Container

TECHNICAL SPECIFICATION : We acknowledge with thanks the receipt of your enquiry and are very pleased to quote the best offer as detailed below: Specification of office: 1. Container Dimension – 40’ (length) x 10’ (width) x 8.5’ (height) 2. Floor- MS Structure with M.S pipes, angle & channel weld together + Bison ply board (mixture of cement & wood) 18 mm + 1.0 mm vinyl carpet. 3. Walls – MS Structure + 1.4mm Profiled MS Sheet + 25mm Glass wool Insulation + pre-laminated MDF Board of 9mm. Walls are designed to absorber Heat and noise. 4. Roof –MS Structure + 1.2mm Profiled MS sheet + 50mm Glass wool insulation + pre-laminated MDF Board 9mm. Roof are designed to absorber Heat & also with proper sloping and gutters to run water while raining. 5. Doors – One door 3’x 6’with 1.4mm Profiled MS Sheet + 25mm Glass wool insulation + pre-laminated MDF Board with canopy. 6. Windows – Six4’x 3’ powder coated two track Aluminium windows on MS Frame with safety grill and canopy. 7. Electrical–All Electrical wiring are done with 3 wire (phase, neutral & earth) with 2.5sqmm wire .Fittings for 8 tube lights 1x40w with wiring of 1.5sqmm, 4 ceiling fans with switches. 16Amps for A/C & 6Amps plug points, 1 bulkhead light outside & 2 MCB. 8. Painting – Metal priming everywhere to with stand rust + Enamel painting exterior – 2 coats.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a34e4529dc5b70a40287142.jpg
Portable Conference Cabin INR 0 INR 0
5b6b364c277b75052ecba313
-NaN%

Portable Conference Cabin

Technical Specification : We acknowledge with thanks the receipt of your enquiry and are very pleased to quote the best offer as detailed below: Specification of office: 1. Container Dimension – 20’ (length) x 10’ (width) x 8.5’ (height) 2. Floor- MS Structure with M.S pipes, angle & channel weld together + Bison ply board (mixture of cement & wood) 18 mm + 1.0 mm vinyl carpet. 3. Walls – MS Structure + 1.4mm Profiled MS Sheet + 25mm Thermocol Insulation + 25mm of glass wool+ pre-laminated MDF Board of 9mm. Walls are designed to absorber Heat and noise. 4. Roof – MS Structure + 1.2mm Profiled MS sheet + 50mm Glass wool insulation + pre-laminated MDF Board 9mm. Roof are designed to absorber Heat & also with proper sloping and gutters to run water while raining. 5. Doors – One door 3’x 6’with 1.4mm Profiled MS Sheet + 25mm Glass wool insulation + pre-laminated MDF Board with canopy. 6. Windows – Three4’x 3’ powder coated two track Aluminium windows on MS Frame with safety grill and canopy. 7. Electrical– All Electrical wiring are done with 3 wire (phase, neutral & earth) with 2.5sqmm wire .Fittings for 3 tube lights 1x40w with wiring of 1.5sqmm, 2 cabin fans with switches. 16Amps for A/C & 6Amps plug points, 1 bulkhead light outside & 2 MCB. 8. Painting – Metal priming everywhere to with stand rust + Enamel painting exterior – 2 coats.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a34e21a5f11370a7c91eaf3.jpg
Portable Office Cabin INR 0 INR 0
5b6b364c277b75052ecba2fe
-NaN%

Portable Office Cabin

Technical Specification : We acknowledge with thanks the receipt of your enquiry and are very pleased to quote the best offer as detailed below: Specification of office: 1. Container Dimension – 20’ (length) x 10’ (width) x 8.5’ (height) 2. Floor- MS Structure with M.S pipes, angle & channel weld together + Bison ply board (mixture of cement & wood) 18 mm + 1.0 mm vinyl carpet. 3. Walls – MS Structure + 1.4mm Profiled MS Sheet + 25mm Thermocol Insulation + 25mm of glass wool+ pre-laminated MDF Board of 9mm. Walls are designed to absorber Heat and noise. 4. Roof – MS Structure + 1.2mm Profiled MS sheet + 50mm Glass wool insulation + pre-laminated MDF Board 9mm. Roof are designed to absorber Heat & also with proper sloping and gutters to run water while raining. 5. Doors – One door 3’x 6’with 1.4mm Profiled MS Sheet + 25mm Glass wool insulation + pre-laminated MDF Board with canopy. 6. Windows – Three4’x 3’ powder coated two track Aluminium windows on MS Frame with safety grill and canopy. 7. Electrical– All Electrical wiring are done with 3 wire (phase, neutral & earth) with 2.5sqmm wire .Fittings for 3 tube lights 1x40w with wiring of 1.5sqmm, 2 cabin fans with switches. 16Amps for A/C & 6Amps plug points, 1 bulkhead light outside & 2 MCB. 8. Painting – Metal priming everywhere to with stand rust + Enamel painting exterior – 2 coats.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a324aca50d5270beca52c89.jpg
Portable Office Cabin INR 0 INR 0
5b6b364c277b75052ecba2e9
-NaN%

Portable Office Cabin

TECHNICAL SPECIFICATION SI NO COMPONENT DESCRIPTION 01 Bottom Frame 100mmx50mm G, C Channel & pipe ISI Marked. 02 Top Frame 50mmx50mm Ms Square Pipe ISI Marked. 03 Stiffener Bottom 75mmx40mm C channel Angles & pipes ISI Marked. 04 Stiffener Top 40mmx20mm MS square pipe ISI Marked. 05 Side Post 50mmx50mm Ms square pipe ISI Marked. 06 Side Wall Stiffeners Specially formed CR sheets of make TATA / Jindal. 07 Paneling Outside Specially formed CR sheets TATA / Jindal. 08 Internal Wall Paneling 8mm OSL MDF of make Leo Classic. 09 Roof Outside Jindal CR sheet of 1.2mm thick properly sloped & water tight. 10 False Ceiling 8mm OSL MDF- Plane White of make Leo Classic. 11 Flooring 18mm Bison Panel with Vinyl carpet. 12 Aluminium Windows Sliding Aluminium Powder Coated Windows With 4mm Glass. 13 Door Ms door with holder draft & handles. 14 Insulation 50mm glass wool insulation on wall & 25mm on ceiling. 15 Wiring All wiring of concealed type & PVC insulated copper wire. 16 Electrical Fittings  All electrical fittings in portable cabin shall be 220-240V.AC 50Hz.  Tubes, Bulkhead, Fan, switches, Sockets & Telephone.  Air conditioner point (MCB) (All type of window Air conditioning Systems as desired upon can be Installed polycab wire. 17 Earthing Earthing point will be provided for safety. 18 Outside Painting 1 coat of Epoxy primer with 2 coats of Epoxy Paint. 19 Hooks Specially formed hooks for easy lifting and shifting. BILL OF QUANTITY SI NO COMPONENT NAME SIZE / Unit QUANTITY 1 Main Door with bulkhead 6.5’X3’ 01 2 Aluminium sliding window with safety grill & net. 4’x3’ 03 3 Cabin fan of make polycab / Usha / orient 300mm 02 4 Main Switch - 01 5 Switch and socket of make Anchor / Roma 16 Amp 01 6 Switch and socket of make Anchor / Roma 6 Amp 12 7 Tube light of make Philips / Wipro / Surya 40 Watt 03 8 Lifting hooks - 04

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a324b6da842b709f8592a2d.jpg
20' Store Container INR 0 INR 0
5b6b364c277b75052ecba2dd
-NaN%

20' Store Container

Specification: Container Dimension –20’(length)x8 ’(width)x 8’ (height) Height Length Width External Dimensions 20′ 6.06m 8’0″2.44m 8’6″ 2.59m Internal Dimensions 19’4″ 5.9m 7’8″ 2.35m 7’8″ 2.35m Door Dimensions 7’8″ 2.28m 7’6″ 2.28m Cubic Capacity 1,160 cubic ft 32.85m3 Maximum Gross Weight 21,600kg Unit Weight 2,400kg

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a324cc7a842b709f8592aef.jpg
4'x4' Security Cabin INR 0 INR 0
5b6b364c277b75052ecba2c8
-NaN%

4'x4' Security Cabin

Specification: 1. Container Dimension – 4’ (length) x4 ’ (width) x 8.5’ (height) 2. Floor- MS Structure with M.S pipes, angle & channel weld together + Bison ply board (mixture of cement & wood) 18 mm + 1.0 mm vinyl carpet. 3. Walls – MS Structure + 1.4mm Profiled MS Sheet + insulation of 25mm Glass wool + pre-laminated MDF Board of 9mm thickness. Walls are designed to absorber Heat and noise. 4. Roof –MS Structure + 1.2mm Profiled MS sheet + 25mm Glass wool insulation + pre-laminated MDF Board of 9mm thickness. Roof is designed to absorber Heat & also with proper sloping and gutters to run water while raining. 5. Doors – One door 3’x 6’with 1.4mm Profiled MS Sheet + 25 mm Glass wool insulation + pre-laminated MDF Board of 9mm thickness with canopy. 6. Windows – One powder coated Aluminium windows and 2 plain glasses on MS Frame with canopy. 7. Electrical–All Electrical wiring are done with 3 wire (phase, neutral & earth) with 2.5sqmm wire .Fittings for 1 tube lights 1x40w, 1 ceiling fan with switches. 6Amps plug & points as required, one bulkhead outside. 8. Painting – Metal priming everywhere to with stand rust + Enamel painting exterior – 2 coats.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a324c38036a27081867a766.jpg
40' Store Container INR 0 INR 0
5b6b364c277b75052ecba2bb
-NaN%

40' Store Container

Specification: Container Dimension– 40’(length)x8 ’(width)x8’ (height) Length Width Height External Dimensions 40′ 6.06m 8’0″2.44m 8’6″ 2.59m Internal Dimensions 39’4″ 5.9m 7’8″ 2.35m 7’8″ 2.35m Door Dimensions 7’8″ 2.28m 7’6″ 2.28m Cubic Capacity 2,698 cubic ft 32.85m3 Maximum Gross Weight 32,500kg Unit Weight 2,400kg

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5a30da53064b940b54f6496d.jpg
Portable Toilet INR 0 INR 0
5b6b364c277b75052ecba2a6
-NaN%

Portable Toilet

TECHNICAL SPECIFICATION : Container Dimension :– 4’ (length) x 4’ (width) x 8.5’ (height) 1. M. S. Corrugated Exterior. 2. Insulated Door. Size 3’ x 6’.5’’Lockable. 3. Painting “Water Proof Paint” Safe from Rain and Sunlight. 4. Thermocol Installations on Top & 4 Sides. 5. On Four Sides Water & Fire Resistance Hylam Sheets Installed. 6. Water Pipes Installation. 7. Water tank stand on the top of the cabin. ELECTRICAL FITTINGS: - 1. Exhaust Fans. 2. Bulk Head Light Outside the Cabin. 3. Switches & Electricals Fittings. 4. 1 Bulb in side. 5. Main Cable Entry Socket with Aluminum.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
5
false